PROCOOL
AVX-280
2 fan cabinet
cooling system
Suitable for small to medium av cabinets
Two 80mm Thermistor
controlled fans speed up as heat increases and will slow down
as heat decreases. Noise rating of 9-17 dBA at 28-64 CFM of
airflow = Silent and Powerful. This system will replace the
air in an average AV cabinet 5+ times per minute. You can
easily set up to either blow air in or exhaust out, or both
if your cabinet is fully enclosed. You can also place the
fan(s) on the vents of a component for direct cooling.
Each
fan has it's own thermistor probe (18" length) that you position
near the heat source for precision cooling. Or can be located
at the top of the cabinet for overall temperature sensing.
The Multi fan controller has a 24" Thermal probe that should
be located the same way. You should consider the heat source
when deciding where to locate the probes. It is best to locate
the controller probe near the hottest source.
The
PROCOOL Multi fan controller will turn the fans on and off
at your desired temperatures. Set the controller start and
stop temps. When the start temp is reached the controller
will start the fans. The fans will then regulate their speed
as needed until the stop temperature is reached and then the
fans will shut off until needed again.
Mounting plates
and screws are included for easy installation.
Filter covers included to keep dust out and are easy to clean.
Comes with a mounting kit that includes all screws needed
and wire ties
for easy wire management.
Installation and operating instructions can be downloaded
below.
The
AVX-280 system includes:
2 - 80mm Thermistor Fans
2 - Black wire grill/guards
2 - Filter covers
2 - Mounting plates
1 - Fan controller
1 - Power supply
1 - Mounting kit
| |
| Fan
Size: |
80mm
x 80mm x 25mm |
| Fan
Speed: |
1000-1700
RPM |
| Air
Flow: (each fan) |
14-32
CFM |
| Air
Flow: (combined) |
28-64
CFM |
| Noise:
(each fan) |
6-14
dBA |
| Noise:
(combined) |
9-17
dBA |
| Bearings:
|
FDB,
fluid dynamic bearings |
| Fan
Power wire length |
12" |
| Fan
Thermistor wire length |
18" |
| Power
Supply: |
100-240
VAC/12VDC |
| Power
Supply Cable length |
36"
|
| Current
draw: (each fan) |
0.16A |
| Power
consumption: (each fan) |
1.92w |
| Grills/Guards:
|
Black
Wire/Filter |
| Mounting
plate size |
4.5"
x 4.5" |
| Mounting
plate color/material |
satin
black metal |
Operating Instructions