PROCOOL Professional Cooling Solutions

Description
Specifications
More Info
Reviews

The PROCOOL SP480XT is a temperature controlled, variable speed silent rackmount fan system.

With a noise level of only 12-20 dBA at top speed, the SP480XT is one of the quietest 2U rackmount fan models available.
The low noise makes this fan suitable for noise sensitive applications from home AV to professional studios.
And with airflow pushing at 56-128 CFM this fan can cool the hottest racks!

Available in both intake and exhaust versions.
The Intake model SP480XT blows air into the rack.
The Exhaust model SP480XT-E pulls air from the rack.

✓ Quiet operation - 12-20 dBA
✓ High Airflow - 56-128 CFM
✓ 3 Year Warranty

Operating Instructions

SP480 Operating Instructions.pdf

Fan Controller Connections

Thermal Probe

How it works:

User sets the controller's on and off temps to start and stop the system. Typical start temp is about 80-85F. Off temp at or slightly above room temp. These settings can be adjusted for optimal performance. The controller has a temp sensor that should be located on or near the heat source, or can be located at the top of the cabinet for an ambient reading. This temp is displayed on the controller during operation for easy monitoring. Or, the display can be shut off during operation. (See Operating instructions)

Each of the 4 fan power connectors are numbered 1 thru 4 corresponding to the front panel LED indicators. When the LED's are on that fan will be on. When the LED's are off those fans will be off.
Global setting: Front panel LED's for fans 1-4 are all on.
Individual setting: Front panel LED on for one fan at a time.

Programming Temperature profiles:

Set the Global range higher than individual fan settings. If the highest individual temp is for example 90F set the Global temp to 92F or higher. If the Global temp is set to start at 85F then any fans set to start at 90F they will start when the Global start point of 85F is reached. Likewise if using the Global setting, make sure all individual settings are set outside of the Global range. The same rule applies for the OFF settings.

Procool SXT80 Fans...

Procool model SXT80 fans are Silent temperature controlled variable speed 80mm fans.

Speeds range from 1200 RPM idle start speed to 2400 RPM at full speed.

SXT80 fans have a thermal sensor that detects the temperature and tells the fan how fast to run. The sensor should be located on or near the heat source for optimal performance.

When the sensor detects heat above 77°F the fan speed will begin to increase.The fan will reach full speed of 2400 RPM at 104°F.

Power supply model # PSW-12V2A

Input: 100-240 VAC

Output: 12VDC

AC plug type: NEMA 1-15P

DC Cable: 36 inch with 2.1mm barrel plug

Panel Size:	(2U) 19" x 3.5" x 1.5"	Air Pressure Chart Thermistor Speed Chart
Panel color/material:	black/metal
Fans:	4
Fan Size:	80mm x 80mm x 25mm
Fan Speed:	1200-2400 RPM
Air Flow:	56-128 CFM
Noise:	12-20 dBA
Bearings:	FDB, fluid dynamic bearings
Fan Thermistor wire length:	24"
Controller Thermal Probe length:	24" (48" available)
Power Supply:	100-240 VAC - 12 VDC
Power Supply Cable length:	36"
Power Supply Plug Type:	NEMA 1-15P
Current draw:	0.68A
Power consumption:	8.16w
Grills/Guards:	Black Wire
Fan Model SXT80 data sheet SP480 Operating Instructions.pdf

Installation Instructions

Mount the fan in the desired location. Connect the power supply to the fan panel with the mating plugs. Connect the power supply to AC power. The power supply accepts from 100 to 240VAC.

Operating Instructions

SP480XT Operating Instructions.pdf

Care and Maintenance

To maintain optimal performance, keep the fans clean. Canned air works well. If the fans are used outdoors or in a dusty environment is recommended to clean the fan blades as needed to keep clean.

Blade Removal

For cleaning and maintenance, the blade prop can be removed.
Grasp the blade prop and pull straight out of the fan body. Inspect the shaft and lubricate if needed. Any oil will work; light grease works best. Clean blade as needed with a dry cloth. Soap and water can be used if needed, but should be thoroughly rinsed and dried before use. Reinstall the blade; when properly installed the blade will snap into place.

Troubleshooting

The fan will not start:

1. Is the controller display on? If Yes, skip to #3.
2. Check the power connections. The power supply has a green led indicator, it should be on. If it is not check the power source. If not lit or flashing, it would indicate power supply failure or no power source power.
3. Check that the fan plugs are all plugged in on the back of the controller.
4. Check the fan blades to make sure they are fully seated in the housing. Press on the center of the blade and push in. If it is not seated you can hear it snap into place.
5. Turn the fan blade by hand to see if they are stuck. They should be free moving. If this starts the fan it is likely the fans need maintenance.

The fan is making noise:

1. Check for anything that could be rubbing against the fan blade.
2. Make sure the fan blades are clean. Dirty fan blades can cause a rattling noise.
3. Check the blade prop shaft for lubrication. (See step #3 above)

If the above steps do not solve the problem, contact our friendly customer service for assistance.

Customer Reviews

0 / 0 Reviews

Be the first to review this fan.

SAMPLE REVIEWS

Reviewed By: Jimmy on May 23rd 2016

The best rack cooling fan I've ever owned.

Reviewed By: John on May 24th 2016

Keeps my rack cool and is absolutely silent.

PROCOOL SP480XT Review
Name *
First Name Last Name
E-mail *
Phone Number
- Area Code Phone Number
Order Number
Review *
Comments
Privacy Options *

Post review with my first name only. Post my review as "Anonymous"
Should be Empty:

Frequently purchased with this item
C14 Plug Adaptor Converts NEMA 5-15R to IEC320 C14 Use to connect all Procool power supplies to C13 receptacle. Length = 12 inches Part No. PSA-C14	AU Plug Adaptor Converts US or EU plug to fit Australian outlets Part no. PSA-AU	EU Plug Adaptor Converts US and UK plug to fit European outlets Part no. PSA-EU

Procool SP480XT

Temperature controlled Variable Speed Silent Fan System

Need it fast?
Need a large quantity?
Call or email us for a quote.

The PROCOOL SP480XT is a temperature controlled, variable speed silent rackmount fan system.

Operating Instructions